Description
Our Solid Panther Black Pastel Perspex Sample is made from high quality cast acrylic manufactured in the UK by PERSPEX.
COVID-19 UPDATE
We are currently experiencing a slight disruption to our supply chain due to Covid-19.
This means despatch of our splashback panels currently have a lead time of 4-6 weeks depending on materials selected.
Currently Glass and Solid colours are still 4 weeks as normal, ‘3 & 5mm’ Acrylic are 6 weeks.
If you have any questions at all please contact customer service on sales@geniesplashbacks.co.uk or call 023 9248 9626
Solid Panther Black Pastel Perspex Sample
Unsure? Read our handy guide
3mm Natural Crystal Finish
3mm Uncoated (natural crystal 3mm) - A thinner 3mm thick alternative to our 5mm thick panels. These are much more flexible than our 5mm panels, making them perfect for slight curves or situations where ultra-light applications are needed. These do not have scratch, mould and chemical resistant properties.Hob Users Important Information Your acrylic panels are not suitable for behind gas or electric ring cooker hobs unless they have a glass lift up hood/lid that protects the wall behind when in operation. They can, however, be installed behind induction and ceramic hobs if a minimum distance of 50mm is maintained.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
5mm Natural Crystal Finish
5mm Uncoated (natural crystal) - Visually indistinguishable from our Premium Hard-coated panels. The only difference is that these panels do not have the scratch, mould and chemical resistant properties.Hob Users Important Information Your acrylic panels are not suitable for behind gas or electric ring cooker hobs unless they have a glass lift up hood/lid that protects the wall behind when in operation. They can, however, be installed behind induction and ceramic hobs if a minimum distance of 50mm is maintained.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
5mm Premium Hard Coated Gloss Finish
5mm Hard-coated acrylic (premium gloss) - Your scratch resistant hard-coated panels also have mould and detergent resistant properties; making them the most hygienic and safe way to protect your kitchen, bathroom or any other room or purpose. They are light, while remaining very hard wearing.Acrylic is up to 10 times more impact resistant than glass. There is an unlimited range of colours and designs, while colour matching available.
Colour and designs are applied to the rear of the panel giving that expensive, bespoke, glass effect. These have a high gloss front face finish.
Hob Users Important Information Your acrylic panels are not suitable for behind gas or electric ring cooker hobs unless they have a glass lift up hood/lid that protects the wall behind when in operation. They can, however, be installed behind induction and ceramic hobs if a minimum distance of 50mm is maintained.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
5mm Premium Hard Coated Matt Finish
5mm Hard-coated acrylic (premium matt) - Your scratch resistant hard-coated panels also have mould and detergent resistant properties; making them the most hygienic and safe way to protect your kitchen, bathroom or any other room or purpose. They are light, while remaining very hard wearing.Acrylic is up to 10 times more impact resistant than glass. There is an unlimited range of colours and designs, while colour matching available.
Colour and designs are applied to the rear of the panel giving that expensive, bespoke, glass effect. These have a unique matt front face finish.
Hob Users Important Information Your acrylic panels are not suitable for behind gas or electric ring cooker hobs unless they have a glass lift up hood/lid that protects the wall behind when in operation. They can, however, be installed behind induction and ceramic hobs if a minimum distance of 50mm is maintained.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
Where a direct heat source is in use (i.e. behind gas hobs), one of our low iron toughened glass panels should be installed as an alternative.
Due to temperature variations, your panels will expand and contract slightly. With this in mind, the panels should always be installed with an expansion gap. Our recommendation is a to allow 2mm expansion on each side of your panel.
6mm Glass (Toughened)
Highly scratch resistant, toughened glass. Our glass is low-Iron…meaning that it is as crystal clear as possible. This stops the green tint that you see on most glass, meaning the colour will be unaltered and seen as it was intended. Tough and heavyweight items. Bespoke, unique, classy look. Our glass is heat resistant so can be used behind direct heat sources. You can have any colour or design…just as all our acrylics.Optional Extras
£1.66 £0.83
Product Description
Test in your bathroom or kitchen using our Solid Panther Black Pastel Perspex Sample to find the perfect colour to suit you!
Delivery & Charges
Delivery charges vary according to the type of goods ordered and the location of the delivery address.
- Our delivery charges are set out on our website and are correct to the best of our knowledge at the time of you placing your order.
- In the event that your order is over sized or over weight as specified on the website, or your delivery address excluded from normal delivery rates (see 11.3 below) you may be required to pay extra delivery charges and it might not be possible for us to deliver to some locations.
- Please note that our prices for delivery are solely for deliver to addresses within the United Kingdom, but excluding the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland and the Channel Isles. For delivery to these excluded addresses and to Europe and other parts of the world please E-mail us at sales@genieacrylics.co.uk with details of you preferred delivery address.
- We will deliver the goods to the address you specify for the delivery of your order. It is important that this address is complete and accurate. Please be precise about where you would like the goods left if you are out when we deliver. We cannot accept any liability for any loss or damage to the goods once they have been delivered in accordance with your delivery instructions (unless this is caused by our negligence). We will aim to deliver the goods by the date quoted for delivery but delivery times are not guaranteed and therefore time is not of the essence. In any event, we will aim to deliver your goods within 30 working days from the day after the day we acknowledged your order. If delivery is delayed beyond this time, we will contact you and either agree a mutually acceptable alternative date, or offer you a full refund.
- You will become the owner of the goods you have ordered when they have been delivered to you. Once goods have been delivered to you they will be held at your own risk and we will not be liable for their loss or destruction.
These are a few of our frequently asked questions for splashbacks.
What is the maximum size I can order?
The maximum size that we can safely deliver is 3000mm x 1100mm for backed colour acrylic. However if your requirements exceed these current limitations please email us at sales@geniesplashbacks.co.uk and we will happily consider your request.
How long until I get my items?
We aim to dispatch within 20 working days of processing your order.
Can I get a sample?
Sure, on our acrylic sample page you can choose your colour samples. All of our colour samples are made from our premium hardcoated acrylic. We can also provide matt finished samples on request.
I need a strange shape, can you cut it to shape for me?
Yes, we can make the acrylic panels to your specific requirements. When placing your orders simply enter your measurements into the Width & Height boxes, then add on the amount of extra cut-out areas etc that you will require. You will get an instant cost calculation shown to you on the page. You will also be given the opportunity to upload a diagram of your project. This will include the extra positioning measurements that we will need to make the panel(s) to your requirements. Remember, we cut exactly to your measurements and diagrams do please ensure they are correct. If you need help, call us, we are here to help.
For more splashback FAQ visit our FAQ page here.
WHERE CAN I PUT MY SPLASHBACKS?
Which material is right for me?
3mm Natural Crystal Finish
3mm Uncoated (natural crystal 3mm) - A thinner 3mm thick alternative to our 5mm thick panels. These are much more flexible than our 5mm panels, making them perfect for slight curves or situations where ultra-light applications are needed. These do not have scratch, mould and chemical resistant properties.
5mm Natural Crystal Finish
5mm Uncoated (natural crystal) - Visually indistinguishable from our Premium Hard-coated panels. The only difference is that these panels do not have the scratch, mould and chemical resistant properties.
5mm Premium Hard Coated Gloss Finish
5mm Hard-coated acrylic (premium gloss) - Your scratch resistant hard-coated panels also have mould and detergent resistant properties; making them the most hygienic and safe way to protect your kitchen, bathroom or any other room or purpose. They are light, while remaining very hard wearing.
6mm Toughened Glass
Highly scratch resistant, toughened glass. Our glass is low-Iron…meaning that it is as crystal clear as possible. This stops the green tint that you see on most glass, meaning the colour will be unaltered and seen as it was intended. Tough and heavyweight items. Bespoke, unique, classy look. Our glass is heat resistant so can be used behind direct heat sources. You can have any colour or design…just as all of our acrylics.
