15% OFF ALL SPLASHBACKS WITH CODE AUTUMN15
NOW IN STOCK – THE GLITTER RANGE!
ROSE PINK ACRYLIC SPLASHBACK SAMPLE
LIME GREEN ACRYLIC SPLASHBACK SAMPLE
SKY BLUE ACRYLIC SPLASHBACK SAMPLE
LEMON YELLOW ACRYLIC SPLASHBACK SAMPLE
VIOLET ACRYLIC SPLASHBACK SAMPLE
Can’t decide on Colour? Colour Samples are a perfect way to try out your colours and finishes before you commit – Try as many as you like!Browse SAMPLES
Wet rooms are great areas to really make a statement and inject your own personality. Tiles are the obvious choice but are more likely to attract mould through the grouting and this can be a laborious task to clean on a daily basis. Splashbacks don’t have this issue and fast becoming the backdrop in many a wet room.
Our materials are perfect for use in wet rooms and all designed with liquid and water in mind. We offer three types of acrylic, 3mm natural crystal finish, 5mm natural crystal finish and 5mm premium hard coated gloss and a 6mm toughened glass. All our materials are lightweight but offer maximum protection.
Wet rooms are notorious for costing the earth, especially when you throw tiling into the mix. But with our wet room splashbacks, this is not the case. The materials we use are affordable and stylish and suit all budgets.
Don’t play it safe with a grey or white wet room. Why not be daring and go for printed penguin splashback or sunset mountain. All of our wet room splashbacks can be personalised. From your brand logo, company values or much-loved quotes, we can bring these to life.
If you would like to take a closer look at the materials we use, why not order a sample. We have a selection available to order and these can be found on our shop page all made from our premium hard coated acrylic range.
You don’t have to be a DIY expert to fit our wet room splashbacks, but to make it easier, simply follow our how-to installation guide.
Over time all materials lose their colour, durability and protection. Water and the sun’s rays play a huge part in this. It is therefore vital to ensure your splashbacks are cleaned and looked after on a regular basis in order to prevent damage. All of our splashbacks have undergone rigorous chemical testing to assist with the prevention of mould formation and protection from UV rays.
3mm Natural Crystal Finish
3mm Uncoated (natural crystal 3mm) - A thinner 3mm thick alternative to our 5mm thick panels. These are much more flexible than our 5mm panels, making them perfect for slight curves or situations where ultra-light applications are needed. These do not have scratch, mould and chemical resistant properties.
5mm Natural Crystal Finish
5mm Uncoated (natural crystal) - Visually indistinguishable from our Premium Hard-coated panels. The only difference is that these panels do not have the scratch, mould and chemical resistant properties.
5mm Premium Hard Coated Gloss Finish
5mm Hard-coated acrylic (premium gloss) - Your scratch resistant hard-coated panels also have mould and detergent resistant properties; making them the most hygienic and safe way to protect your kitchen, bathroom or any other room or purpose. They are light, while remaining very hard wearing.
6mm Toughened Glass
Highly scratch resistant, toughened glass. Our glass is low-Iron…meaning that it is as crystal clear as possible. This stops the green tint that you see on most glass, meaning the colour will be unaltered and seen as it was intended. Tough and heavyweight items. Bespoke, unique, classy look. Our glass is heat resistant so can be used behind direct heat sources. You can have any colour or design…just as all of our acrylics.